From: Kin Wai (kinwai@singnet.com.sg)
Date: Wed Jun 22 2005 - 06:39:58 GMT-3
I guess I might be posting to a wrong group but just hope some expert can
enlighten me on this.
I'm facing problem getting the ip communicator boot up correctly in a
foreign network when I vpn (PPTP) into this router.
I receive the following debug message from the router :
c3725#
Jun 22 09:15:28.366: New Skinny socket accepted [6] (5 active)
Jun 22 09:15:28.366: sin_family 2, sin_port 1292, in_addr 218.186.54.x
Jun 22 09:15:28.366: skinny_add_socket 6 218.186.54.x 1292
Jun 22 09:15:28.410: socket_recv 92 bytes, expected 96
Jun 22 09:15:28.410: Skinny Header was 96 0
20 2 203A3431 656D614E 5045533D 43303030 42323146 38304444
Jun 22 09:15:28.410: 616F4C20 2E313D64 2E342E31 614C2030 433D7473 6C632D4D
64657
36F 5043542D
Jun 22 09:15:28.410: 0 0 0 0 0 0 0
Jun 22 09:15:28.410:
Jun 22 09:15:28.410: CLOSED Skinny socket 6 on recv errno=0 (5 active)
error code 0
TFTP: Fa0/0 (wan ip of my router)
Telephony: WAN IP port 2000
I have done the necessary port forwarding and stuff, therefore I guess my
vpn is working.
After I vpn into the network, I'm able to surf net and reach my LAN hosts.
[That's what I want =)]
Got a few chances when I was using dial-up and vpn into the network. It
actually works!
I don't really understand why.
This archive was generated by hypermail 2.1.4 : Wed Jul 06 2005 - 14:43:42 GMT-3