Re: Testing DLSW+ Operating

From: gladston@br.ibm.com
Date: Tue Jun 21 2005 - 22:14:32 GMT-3

• Next message: Larry Roberts: "Re: VPN issues - woes, etc.."
• Previous message: gladston@br.ibm.com: "Re: TCP session and ARP aging time out"
• Maybe in reply to: TK ...: "Testing DLSW+ Operating"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi,

I used these ways:

-Win95 with Netbeui (without tcp/ip)
-show dlsw peers (with debug dlsw) to check if the peers get connected
-dlsw disable an no dlsw disable to help the previous check

If you are not using DLSW over isdn, with keepalive 0, you should see the peers connected (sh dlsw peer).

By the way, it is funny to play with DLSW over isdn. There is a technote about this:

http://www.cisco.com/en/US/tech/tk331/tk336/technologies_configuration_example09186a0080093db8.shtml

Access-list are also helpful to check what is going on. For example, you can deny ip any any log, do dlsw disable, no dlsw disable and see what is denied.

Good Luck.

• Next message: Larry Roberts: "Re: VPN issues - woes, etc.."
• Previous message: gladston@br.ibm.com: "Re: TCP session and ARP aging time out"
• Maybe in reply to: TK ...: "Testing DLSW+ Operating"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Wed Jul 06 2005 - 14:43:42 GMT-3