From: Keane, James (James.Keane@agriculture.gov.ie)
Date: Tue Jun 21 2005 - 05:36:26 GMT-3
This is a multi-part message in MIME format.
------_=_NextPart_001_01C5763C.50481B4F
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
I have never played with dialer max-call or dialer pool-member max-links it=
would be interesting to see what effect they have,=20
but it seems that your second dialer string was causing the problem ..
I notice you are using load-thershold 1, if you want to bring both lines up=
maybe min-links 2 would be more appropiate.
=20
=20
=20
-----Original Message-----
From: gladston@br.ibm.com [mailto:gladston@br.ibm.com]
Sent: 20 June 2005 20:43
To: Brian McGahan; Keane, James
Cc: ccielab@groupstudy.com
Subject: RE: ISDN Maximum allowed call
Thanks for the replies,=20
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=20
Are you logging dialer ?=20
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=20
Yes, it is.=20
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=20
Try rebooting the router and see if it helps.=20
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=20
I reload the routers R2 and R5 and nothing changed. I asked the lab vendor =
guy to reload the ISDN simulator, but I did not get a response yet.=20
I removed all configs, tested with just one dialer string, and the message =
stopped:=20
r5#sh dialer=20
BRI0/0 - dialer type =3D ISDN=20
Dial String Successes Failures Last DNIS Last status=20
0 incoming call(s) have been screened.=20
0 incoming call(s) rejected for callback.=20
BRI0/0:1 - dialer type =3D ISDN=20
Idle timer (never), Fast idle timer (20 secs)=20
Wait for carrier (30 secs), Re-enable (15 secs)=20
Dialer state is data link layer up=20
Interface bound to profile Di25=20
Current call connected 00:00:51=20
Connected to 8358661 (r2)=20
BRI0/0:2 - dialer type =3D ISDN=20
Idle timer (never), Fast idle timer (20 secs)=20
Wait for carrier (30 secs), Re-enable (15 secs)=20
Dialer state is multilink member=20
Interface bound to profile Di25=20
Current call connected 00:00:20=20
Connected to 8358661 (r2)=20
Di25 - dialer type =3D DIALER PROFILE=20
Load threshold for dialing additional calls is 1=20
Idle timer (never), Fast idle timer (20 secs)=20
r5#sh deb=20
Dial on demand:=20
Dial on demand events debugging is on=20
I will add the second dialer string to check if it changes the result.=20
Cordially,
------------------------------------------------------------------
Gladston=20
"Brian McGahan" <bmcgahan@internetworkexpert.com>=20
20/06/2005 12:19=20
To
Alaerte Gladston Vidali/Brazil/IBM@IBMBR, <ccielab@groupstudy.com>=20
cc
Subject
RE: ISDN Maximum allowed call
=09
I've seen this (false) error before with PPP authentication to
AAA. Try rebooting the router and see if it helps.
HTH,
Brian McGahan, CCIE #8593
bmcgahan@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987 x 705
Outside US: 775-826-4344 x 705
24/7 Support: http://forum.internetworkexpert.com
Live Chat: http://www.internetworkexpert.com/chat/
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
Of
> gladston@br.ibm.com
> Sent: Monday, June 20, 2005 10:14 AM
> To: ccielab@groupstudy.com
> Subject: ISDN Maximum allowed call
>
> Hi,
>
> Do you know why IOS would log this message if the config does not use
a
> command to do so?
>
> *Mar 1 10:21:15.568: BR0/0 DDR: has 2 ongoing call(s), maximum
allowed
> call(s) 2 on pool 25, exceeded max
>
> interface Dialer25
> ip address 172.16.25.5 255.255.255.0
> encapsulation ppp
> dialer pool 25
> dialer remote-name r2
> dialer idle-timeout 60
> dialer string 8358663
> dialer string 8358661
> dialer load-threshold 1 outbound
> dialer watch-group 5
> ppp callback request
> ppp authentication chap
> ppp multilink
> end
>
> r5#sh run int bri 0/0
> Building configuration...
>
> Current configuration : 154 bytes
> !
> interface BRI0/0
> no ip address
> encapsulation ppp
> dialer pool-member 25
> isdn switch-type basic-ni
> isdn spid1 0835866201
> isdn spid2 0835866401
> end
>
> r5#
> *Mar 1 10:21:14.134: Di25 DDR: idle timeout
> *Mar 1 10:21:14.134: DDR: Dialer Watch: watch-group =3D 5
> *Mar 1 10:21:14.134: DDR: network 172.16.7.1/255.255.255.255
DOWN,
> *Mar 1 10:21:14.134: DDR: network 172.16.2.1/255.255.255.255
DOWN,
> *Mar 1 10:21:14.134: DDR: primary DOWN
> r5#
> *Mar 1 10:21:15.568: BR0/0 DDR: has 2 ongoing call(s), maximum
allowed
> call(s) 2 on pool 25, exceeded max
>
>
This archive was generated by hypermail 2.1.4 : Wed Jul 06 2005 - 14:43:42 GMT-3