From: Scott Morris (swm@emanon.com)
Date: Mon Jun 20 2005 - 22:51:15 GMT-3
By the way... What is version 6.6??? That's not your PIX software. :)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
chon_mon@nym.hush.com
Sent: Monday, June 20, 2005 8:59 PM
To: swm@emanon.com
Cc: ccielab@groupstudy.com; security@groupstudy.com
Subject: RE: VPN timeout issues
I am running version 6.6. I got passed the timeout errors, and NAT-
traversal errors on the Sonicwall. Now on the pix, when I ping from a host
on the 192.168.2.0 network to a host on the 192.168.10.0 network the
following is my debug from the PIX:
scenario for site-to-site VPN
192.168.2.0<---->PIX<----------->SONIC<-------->192.168.10.0
pixconfig i
sysopt connection permit-ipsec
crypto ipsec transform-set halo esp-3des crypto map test 10 ipsec-isakmp
crypto map test 10 match address NONAT crypto map test 10 set pfs group2
crypto map test 10 set peer 210.4.56.9 crypto map test 10 set transform-set
halo crypto map test interface outside isakmp enable outside isakmp key test
address 210.4.56.9 netmask 255.255.255.192 no-xauth
no-config-mode
isakmp policy 10 authentication pre-share isakmp policy 10 encryption 3des
isakmp policy 10 hash md5 isakmp policy 10 group 1 isakmp policy 10 lifetime
28800
Any help you can provide, I would be grateful! TIA - Sean
PIX(config)# sh debug
debug crypto ipsec 1
debug crypto isakmp 1
PIX(config)#
ISAKMP (0): beginning Main Mode exchange
crypto_isakmp_process_block:src:210.4.56.9, dest:21.19.178.2 spt:500 dpt:500
OAK_MM exchange ISAKMP (0): processing SA payload. message ID = 0
ISAKMP (0): Checking ISAKMP transform 1 against priority 10 policy
ISAKMP: encryption 3DES-CBC
ISAKMP: hash MD5
ISAKMP: default group 1
ISAKMP: auth pre-share
ISAKMP: life type in seconds
ISAKMP: life duration (basic) of 28800
ISAKMP (0): atts are acceptable. Next payload is 0 ISAKMP (0): SA is doing
pre-shared key authentication using id type
ID_FQDN
return status is IKMP_NO_ERROR
crypto_isakmp_process_block:src:210.4.56.9, dest:21.19.178.2 spt:500 dpt:500
OAK_MM exchange ISAKMP (0): processing KE payload. message ID = 0
ISAKMP (0): processing NONCE payload. message ID = 0
ISAKMP (0): processing vendor id payload
ISAKMP (0): processing vendor id payload
ISAKMP (0): processing vendor id payload
ISAKMP (0): received xauth v6 vendor id
ISAKMP (0): ID payload
next-payload : 8
type : 2
protocol : 17
port : 500
length : 24
ISAKMP (0): Total payload length: 28
return status is IKMP_NO_ERROR
crypto_isakmp_process_block:src:210.4.56.9, dest:21.19.178.2 spt:500 dpt:500
ISAKMP (0): processing NOTIFY payload 18 protocol 1
spi 0, message ID = 2111508800
ISAKMP (0): dropping NOTIFY on unauthenticated SA.
return status is IKMP_NO_ERR_NO_TRANS
ISAKMP (0): retransmitting phase 1 (1)...
crypto_isakmp_process_block:src:208.253.241.130, dest:21.19.178.2 spt:500
dpt:500
ISAKMP: error, msg not encryptedIPSEC(key_engine): request timer
fired: count = 1,
(identity) local= 21.19.178.2, remote= 210.4.56.9,
local_proxy= 192.168.2.0/255.255.255.0/0/0 (type=4),
remote_proxy= 192.168.10.0/255.255.255.0/0/0 (type=4)
ISAKMP (0): retransmitting phase 1 (2)...
crypto_isakmp_process_block:src:210.4.56.9, dest:21.19.178.2 spt:500 dpt:500
ISAKMP: error, msg not encrypted
ISADB: reaper checking SA 0x582bf84, conn_id = 0 ISAKMP (0): deleting SA:
src 21.19.178.2, dst 210.4.56.9
ISADB: reaper checking SA 0x582bf84, conn_id = 0 DELETE IT!
VPN Peer:ISAKMP: Peer Info for 210.4.56.9/500 not found - peers:0 und all
PIX(config)#
On Mon, 20 Jun 2005 17:13:04 -0700 Scott Morris <swm@emanon.com>
wrote:
>Keepalives are good only after your IKE SA is set up! Lifetimes are
>good for the negotiation, but do all your other IKE parameters match?
>
>I don't play with Sonicwall stuff, so I have no idea what to tell you
>to look for on there. But the things that you configure in your isakmp
>policy on the PIX should help you determine what things need to match
>on the other end!
>
>Do debugs on the PIX tell you anything?
>
>Scott
>
>-----Original Message-----
>From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
>chon_mon@nym.hush.com
>Sent: Monday, June 20, 2005 5:43 PM
>To: ccielab@groupstudy.com; security@groupstudy.com
>Subject: VPN timeout issues
>
>Dear Group,
>
>I have configured a site-to-site VPN between a PIX and a Sonic FW.
>
>When the PIX initiates the connection, the Sonic at the remote site
>accepts the phase 1 request, but then times out. The Sonic
>states
>that the "IKE responder: remote party timeout" - and then nothing!
>
>I have both my isakmp keepalives and lifetimes matching for both sides
>of the VPN. Can anyone shed some light on this? TIA - Sean
>
>___________________________________________________________________
>____
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Wed Jul 06 2005 - 14:43:42 GMT-3