From: john matijevic (john.matijevic@gmail.com)
Date: Fri Jun 17 2005 - 14:38:31 GMT-3
Thanks Brian,
The ISP that we are going to will only support Multilink over Frame, so
looks like we have to upgrade our router to support the image for that.
Sincerely,
John
On 6/17/05, Brian McGahan <bmcgahan@internetworkexpert.com> wrote:
>
> This config is for Multilink PPP over Frame-Relay (MLPoFR).
> There is also just Multilink Frame-Relay. Both should work in either
> application. MLPoFR is an older feature and hence more widely supported
> through different versions.
>
> MLPoFR:
> http://www.cisco.com/warp/public/788/voice-qos/designing-mlp-over-fr-atm
> .html
>
> Multilink Frame Relay:
> http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122newft
> /122t/122t8/ft_mfr.htm
>
>
> HTH,
>
> Brian McGahan, CCIE #8593
> bmcgahan@internetworkexpert.com
>
> Internetwork Expert, Inc.
> http://www.InternetworkExpert.com
> Toll Free: 877-224-8987 x 705
> Outside US: 775-826-4344 x 705
> 24/7 Support: http://forum.internetworkexpert.com
> Live Chat: http://www.internetworkexpert.com/chat/
>
>
> > -----Original Message-----
> > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
> Of
> > john matijevic
> > Sent: Thursday, June 16, 2005 7:24 PM
> > To: Chris Lewis (chrlewis)
> > Cc: Group Study
> > Subject: Re: multlink frame-relay
> >
> > Thanks Chris,
> > However, this is multilink over PPP, not multilink over Frame, in my
> case
> > I
> > need to use Multilink over Frame, so this configuration won't work for
> me.
> > Sincerely,
> > John
> >
> > On 6/16/05, Chris Lewis (chrlewis) <chrlewis@cisco.com> wrote:
> > >
> > > Most 12.2T are OK for this. Most preferable is to use a multilink
> > > interface as below, it is more reliable than a virtual template
> alone
> > > for some reason in my experience. The key config elements are given
> > > below:
> > >
> > > !
> > > Multilink virtual-template 1
> > > !
> > > Int s0/0
> > > Fram-relay traffic-shaping
> > > No ip addr
> > > Encap frame
> > > !
> > > Int s0/0.708 point-to-point
> > > Frame-relay interface-dlci 708 ppp virtual-temp 1
> > > !
> > > Int s0/0.718 point-to-point
> > > Frame-relay interface-dlci 718 ppp virtual-temp 1
> > > !
> > > interface Virtual-Template1
> > > no ip address
> > > no peer neighbor-route
> > > ppp authentication chap
> > > ppp multilink
> > > ppp multilink group 1
> > > !
> > > interface Multilink1
> > > ip address 78.78.78.8 <http://78.78.78.8> <http://78.78.78.8>
> > 255.255.255.0 <http://255.255.255.0><http://255.255.255.0>
> > > no cdp enable
> > > ppp authentication chap
> > > ppp multilink
> > > ppp multilink fragment delay 10
> > > ppp multilink group 1
> > >
> > > -----Original Message-----
> > > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
> Of
> > > john matijevic
> > > Sent: Thursday, June 16, 2005 1:43 PM
> > > To: Group Study
> > > Subject: multlink frame-relay
> > >
> > > Hello Team,
> > > Was wondering if anyone uses multilink frame-relay configuration on
> a
> > > 3600 router, if so which IOS version are you using, and have you had
> any
> > > issues.
> > > Thanks for the feedback,
> > > Sincerely,
> > >
> > > --
> > > John Matijevic, CCIE #13254
> > > U.S. Installation Group
> > > Senior Network Engineer
> > > 954-969-7160 ext. 1147 (office)
> > > 305-321-6232 (cell)
> > >
> > >
> _______________________________________________________________________
> > > Subscription information may be found at:
> > > http://www.groupstudy.com/list/CCIELab.html
> > >
> >
> >
> >
> > --
> > John Matijevic, CCIE #13254
> > U.S. Installation Group
> > Senior Network Engineer
> > 954-969-7160 ext. 1147 (office)
> > 305-321-6232 (cell)
> >
> >
> _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
-- John Matijevic, CCIE #13254 U.S. Installation Group Senior Network Engineer 954-969-7160 ext. 1147 (office) 305-321-6232 (cell)
This archive was generated by hypermail 2.1.4 : Wed Jul 06 2005 - 14:43:41 GMT-3