From: marvin greenlee (marvin@ccbootcamp.com)
Date: Fri Jun 17 2005 - 13:45:00 GMT-3
The hardware list also includes 3600s and 3700s, which support OSPFv3 just
fine. If you see on the lab, I strongly doubt that it would be on 6
routers, it would probably just be on two or maybe three.
Marvin Greenlee, CCIE#12237, CCSI# 30483
Network Learning Inc
marvin@ccbootcamp.com
www.ccbootcamp.com (Cisco Training)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
ccie2be
Sent: Friday, June 17, 2005 6:45 AM
To: Group Study
Subject: FW: IPv6 OSPF Support on Lab equipment? [bcc][faked-from]
Importance: Low
Hi Guys,
ospf v3 is supported on 2600xm models.
The equipment list shown on the ccie site only says 2600's - nothing more
specific.
So, given this vague information, should I assume ospfv3 is fair game in the
lab?
TIA, Tim
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of CCIE
Group Study
Sent: Monday, February 07, 2005 7:38 AM
To: ccie; ccielab@groupstudy.com
Subject: Re: IPv6 OSPF Support ?
Good morning:
If you are using a cisco 2600 you will not be able to configure OSPF-3,
(IPv6). The IOS for OSPF-3 is Enterprise Plus (
c2600-js-mz.122-15.T14.bin ) and is available on the cisco 2600xm series of
routers.
Interestingly enought the 2500 series does support OSPF-3 when using
12.2.15T14 IP Plus, ( c2500-is-l.122-15.T14.bin ) with 16M/16F.
George Morton, Ph. D.
----- Original Message -----
From: "ccie" <ccie@gannons.net>
To: <ccielab@groupstudy.com>
Sent: Sunday, February 06, 2005 12:59 PM
Subject: IPv6 OSPF Support ?
> Quick questions just trying to configure ipv6 ospf using
> c2600-j1s3-mz.122-15.T14.bin.
> I had a look at
>
>
http://www.cisco.com/univercd/cc/td/doc/product/software/ios123/123cgcr/ipv6
_c/sa_ospf3.htm#wp1114175
>
> However the commands dont exist below are the nearest I can get. There
> doesnt seem to be a way on
> enabling the OSPF under the interface. I am sure its something simply but
> its driving me nuts !
>
> Rack1R5(config)#ipv unicast-routing
> Rack1R5(config)#ipv6 router ospf 1 Rack1R5(config)#int f 0/0
> Rack1R5(config-if)#ipv
> Rack1R5(config-if)#ipv6 en
> Rack1R5(config-if)#ipv6 enable
> Rack1R5(config-if)#ipv
> Rack1R5(config-if)#ipv6 os
> Rack1R5(config-if)#ipv6 rou
> Rack1R5(config-if)#ipv6 router ?
>
> Thanks & Regards,
> Kevin
>
>
> --
> No virus found in this outgoing message.
> Checked by AVG Anti-Virus.
> Version: 7.0.300 / Virus Database: 265.8.5 - Release Date: 03/02/2005
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Wed Jul 06 2005 - 14:43:41 GMT-3