Re: multlink frame-relay

From: john matijevic (john.matijevic@gmail.com)
Date: Thu Jun 16 2005 - 21:23:39 GMT-3


Thanks Chris,
However, this is multilink over PPP, not multilink over Frame, in my case I
need to use Multilink over Frame, so this configuration won't work for me.
Sincerely,
John

 On 6/16/05, Chris Lewis (chrlewis) <chrlewis@cisco.com> wrote:
>
> Most 12.2T are OK for this. Most preferable is to use a multilink
> interface as below, it is more reliable than a virtual template alone
> for some reason in my experience. The key config elements are given
> below:
>
> !
> Multilink virtual-template 1
> !
> Int s0/0
> Fram-relay traffic-shaping
> No ip addr
> Encap frame
> !
> Int s0/0.708 point-to-point
> Frame-relay interface-dlci 708 ppp virtual-temp 1
> !
> Int s0/0.718 point-to-point
> Frame-relay interface-dlci 718 ppp virtual-temp 1
> !
> interface Virtual-Template1
> no ip address
> no peer neighbor-route
> ppp authentication chap
> ppp multilink
> ppp multilink group 1
> !
> interface Multilink1
> ip address 78.78.78.8 <http://78.78.78.8>
255.255.255.0<http://255.255.255.0>
> no cdp enable
> ppp authentication chap
> ppp multilink
> ppp multilink fragment delay 10
> ppp multilink group 1
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> john matijevic
> Sent: Thursday, June 16, 2005 1:43 PM
> To: Group Study
> Subject: multlink frame-relay
>
> Hello Team,
> Was wondering if anyone uses multilink frame-relay configuration on a
> 3600 router, if so which IOS version are you using, and have you had any
> issues.
> Thanks for the feedback,
> Sincerely,
>
> --
> John Matijevic, CCIE #13254
> U.S. Installation Group
> Senior Network Engineer
> 954-969-7160 ext. 1147 (office)
> 305-321-6232 (cell)
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>

--
John Matijevic, CCIE #13254
U.S. Installation Group
Senior Network Engineer
954-969-7160 ext. 1147 (office)
305-321-6232 (cell)


This archive was generated by hypermail 2.1.4 : Wed Jul 06 2005 - 14:43:41 GMT-3