From: Alec (packtmon@yahoo.com)
Date: Thu Jun 16 2005 - 14:11:32 GMT-3
John,
Except for Lab 9 and 10, are the rest of the solution
configurations complete?
How's their support forum?
Alec
--- John Matus <jmatus@pacbell.net> wrote:
> it says right there on the page "volumes I and II".
> we are talking about
> volume II, not to be confused with volume I version
> 2.x
> the manual is complete, but the solution guide is
> not complete. there are
> 10 labs but only 8 solutions. brian m. said he
> would post lab 9 today, so
> it looks like he has about 57 minutes left before he
> lets us down :-P
>
>
> Regards,
>
> John D. Matus
> MCSE, CCNP
> Office: 818-782-2061
> Cell: 818-430-8372
> jmatus@pacbell.net
> ----- Original Message -----
> From: "Shanky" <shankyz@gmail.com>
> To: "John Matus" <jmatus@pacbell.net>
> Cc: "Alec" <packtmon@yahoo.com>; "John Matus"
> <john_matus@hotmail.com>;
> <ccielab@groupstudy.com>
> Sent: Wednesday, June 15, 2005 10:48 PM
> Subject: Re: IE V2.0 hsrp lab 9
>
>
> >I think IE has not mentioned it on their product
> page..
> >
> >
>
http://www.internetworkexpert.com/iewb-rs.htm?agent_camp=5380001
> >
> > I was under the impression that the product is
> complete in all
> > respects..what the current version BTW ? the
> Sample Lab says 2.20 ?
> >
> > TIA
> > Shanky
> >
> > On 6/16/05, John Matus <jmatus@pacbell.net> wrote:
> >> yeah, the solution guide is not
> finished..........as of today <i checked
> >> @
> >> 5pm> only labs 1-8 had solutions so i was on my
> own for 9 and 10. i was
> >> hoping other were doing the same labs and would
> be able to chime in.
> >>
> >>
> >> Regards,
> >>
> >> John D. Matus
> >> MCSE, CCNP
> >> Office: 818-782-2061
> >> Cell: 818-430-8372
> >> jmatus@pacbell.net
> >> ----- Original Message -----
> >> From: "Alec" <packtmon@yahoo.com>
> >> To: "John Matus" <jmatus@pacbell.net>; "John
> Matus"
> >> <john_matus@hotmail.com>;
> <ccielab@groupstudy.com>
> >> Sent: Wednesday, June 15, 2005 4:53 AM
> >> Subject: Re: IE V2.0 hsrp lab 9
> >>
> >>
> >> > John,
> >> >
> >> > Why are you posting all these questions to GS?
> >> >
> >> > Doesn't IE provide the correct config's for
> their
> >> > labs?
> >> >
> >> > Or, don't they have a support forum for this?
> >> >
> >> > I can't believe that IE doesn't have this.
> >> >
> >> > How long have the labs been available?
> >> >
> >> > A
> >> >
> >> > --- John Matus <jmatus@pacbell.net> wrote:
> >> >
> >> >> Regards,
> >> >>
> >> >> John D. Matus
> >> >> MCSE, CCNP
> >> >> Office: 818-782-2061
> >> >> Cell: 818-430-8372
> >> >> jmatus@pacbell.net
> >> >> ----- Original Message -----
> >> >> From: "John Matus" <john_matus@hotmail.com>
> >> >> To: <ccielab@groupstudy.com>
> >> >> Sent: Tuesday, June 14, 2005 5:35 PM
> >> >> Subject: IE V2.0 hsrp
> >> >>
> >> >>
> >> >> > this was a toughy..........
> >> >> >
> >> >> > since you can not use the mac-address
> command to
> >> >> associate a mac address
> >> >> > w/ the virtual ip address, i first tried
> the
> >> >> approach of creating a
> >> >> > static arp cache entry for the ip/mac, but
> that
> >> >> did not show ip in the
> >> >> > "show standby" details....just the default
> mac
> >> >> address. then i used the
> >> >> > "use-bia" command and i changed the local
> mac to
> >> >> 0000.0c07.acde, but that
> >> >> > only works if THAT machine is the active
> standby
> >> >> router. i have no f'ing
> >> >> > clue how else to solve this problem.
> >> >> >
> >> >> > as far as tracking, i was able to create a
> tracked
> >> >> object to look at route
> >> >> > 112.0.0.0/8, and i was going to use the "ip
> >> >> default-network" command on R1
> >> >> > to point to 156.1.136.254, but it did not
> show
> >> >> that as the gateway of last
> >> >> > resort, which is what i expected, so i'm a
> bit
> >> >> perplexed. maybe i was
> >> >> > looking for the wrong results with that
> command
> >> >> but i'm sure you have to
> >> >> > set the default-gateway on R1 to point to
> the
> >> >> HSRP address.....
> >> >> >
> >> >> > i did not get to the NATing part of this
> >> >> task....my racktime ran out, but
> >> >> > it looks like a doosy.
> >> >> >
> >> >> >
> >> >>
> >> >
>
This archive was generated by hypermail 2.1.4 : Wed Jul 06 2005 - 14:43:41 GMT-3