From: Amit Jain (netsteps@rediffmail.com)
Date: Sun Jun 12 2005 - 08:40:30 GMT-3
RE: Regarding NTP debugDave
The problem got resolved just now after I rebooted R3 and ran tclsh script on
routers. May be some order of operation problem.
Ques asked that R3 which is connected to BB3 should recieved clock from BB3
(204.12.5.254) and R6 should recieve clock from BB1 (54.5.1.254). In case R3
looses conection to BB3, it should get clock from R6.
In my case R3 was not getting clock from BB3 (204.12.5.254) since starting and
master got configured as R6 (150.5.6.6) as desired.
Rack5R3#sh ntp asso det
150.5.6.6 configured, our_master, sane, valid, stratum 5
-
204.12.5.254 configured, insane, invalid, stratum 16
After tis also I was not getting same time on R3 and R6, but now I am getting
the same.
The configs on both sides are:
Rack5R3#sh run | in ntp
ntp authentication-key 1 md5 096F673A3A2A 7
ntp authenticate
ntp trusted-key 1
ntp clock-period 17179882
ntp peer 150.5.6.6
ntp server 204.12.5.254 key 1
Rack5R6#sh run | in ntp
ntp clock-period 17179803
ntp server 54.5.1.254
Thanks
Amit
----- Original Message -----
From: Schulz, Dave
To: netsteps@rediffmail.com ; nobody@groupstudy.com ; ccielab@groupstudy.com
Cc: ccielab@groupstudy.com
Sent: Sunday, June 12, 2005 4:54 PM
Subject: RE: Regarding NTP debug
Amit -
Can you send over the configs that you have for R3 and R6? From the debug,
it appears that you are transmitting the clock information from R3 (rather
than to it). Do you have the ntp server command set up on R6, and, the ntp
peer command on R3?
Dave
-----Original Message-----
From: nobody@groupstudy.com
To: ccielab@groupstudy.com
Sent: 6/12/2005 6:09 AM
Subject: Regarding NTP debug
Group
I have two routers, R3 and R6 with R3 being the peer or R6. On r3 the
clock is not getting updated from R6. "Debug ntp packets" show:
Rack5R3#
NTP: xmit packet to 150.5.6.6:
leap 0, mode 1, version 3, stratum 6, ppoll 64
rtdel 183F (94.711), rtdsp 190B38EE (6411222.382), refid 96050606
(150.5.6.6)
ref AF4B6CFA.D72AFC33 (20:11:38.840 UTC Fri Mar 12 1993)
org C65685FE.23D4C3D5 (09:59:26.139 UTC Sun Jun 12 2005)
rec AF4B6CFA.D72AFC33 (20:11:38.840 UTC Fri Mar 12 1993)
xmt AF4B6D3A.BF889590 (20:12:42.748 UTC Fri Mar 12 1993)
NTP: rcv packet from 150.5.6.6 to 183.5.0.3 on Serial1/1:
leap 0, mode 2, version 3, stratum 5, ppoll 64
rtdel 00AD (2.640), rtdsp 008B (2.121), refid 360501FE (54.5.1.254)
ref C656860B.473784AB (09:59:39.278 UTC Sun Jun 12 2005)
org AF4B6D3A.BF889590 (20:12:42.748 UTC Fri Mar 12 1993)
Rack5R3#
rec C656863E.23F4A9DC (10:00:30.140 UTC Sun Jun 12 2005)
xmt C656863E.2401CA4D (10:00:30.140 UTC Sun Jun 12 2005)
inp AF4B6D3A.D7252728 (20:12:42.840 UTC Fri Mar 12 1993)
Clock on R6 shows 10:00:30.140 UTC Sun Jun 12 2005 but its not getting
updated on R3. Can you pls help with this debug output and explain what
the debug is trying to say?
The scenario is from IE Lab1.
Thanks
Amit
_______________________________________________________________________
Subscription information may be found at:
http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Wed Jul 06 2005 - 14:43:41 GMT-3