From: Richard Gallagher (rgallagh@cisco.com)
Date: Wed Jun 08 2005 - 10:51:44 GMT-3
What process is eating the CPU? What does the following show:
- sh proc cpu | e 0.00
Have you tried the following doc:
- http://www.cisco.com/warp/public/63/highcpu.html
HTH, Rich
* Rich Gallagher - Cisco Systems TAC
* CCIE #7211 - R&S, C&S
mmeiers@wi.rr.com wrote:
>Ok
>
>So i have a wierd thing going on. Has anyone else had a similar issue
>or at least maybe an idea of what may be occuring.
>
>I have a 7206vxr that was running 12.2(24a) connected to a 3660 running
>12.2(10d).
> This 3660 is doing a lot of NAT, the CPU of the 3600 is less than
>30%
>
>I upgraded the 7206 to 12.3(12b) over the weekend and the remote side
>routers, which all run 12.2(10d), all started to have CPU utilizations
>up near 100%.
>
>If I move the remote side router to a different ditribution router that
>does not run 12.3 the CPU goes back down to less than 30%
>
>Thanks
>
>_______________________________________________________________________
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Wed Jul 06 2005 - 14:43:41 GMT-3