RAS Query.

From: diptish.doshi@bt.com
Date: Wed Jun 08 2005 - 01:53:05 GMT-3

• Next message: John Matus: "route filtering with wild-card mask"
• Previous message: John Matus: "RE: extended ping question"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

 Hi All,

I have a NM-16A/DM= for my RAS setup. One line (Async 48) I am using for
Admin access and rest 15 lines (Async 33 to 47) for User Dial-in. Config
is as follows:
!
interface Group-Async1
description "For RAS Dial-in Users"
ip unnumbered FastEthernet0/0
encapsulation ppp
no ip mroute-cache
async dynamic routing
async mode interactive
peer default ip address pool ip_pool
ppp authentication pap rsaauth
group-range 33 47
!

Now I would like to restricts Users dialing in to my RAS on the basis of
SOURCE PSTN NUMBERS. Like we do in ISDN with #dialer caller. Any
pointers how I can achieve this.

Thanx in advance.

Best Regards,
        Diptish Doshi .

• Next message: John Matus: "route filtering with wild-card mask"
• Previous message: John Matus: "RE: extended ping question"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Wed Jul 06 2005 - 14:43:41 GMT-3