From: ccielab@cox.net
Date: Mon Jun 06 2005 - 13:27:10 GMT-3
Diego,
Thanks for the tip, I have Enterperise plus IOS running!
Is there a way to automate this so I don't have to boot my lab from rommon
each time?
Thanks again,
ccielab@cox.net
----- Original Message -----
From: "Zamberlan, Diego" <dzamberlan@verisign.com>
To: <ccielab@cox.net>
Sent: Monday, June 06, 2005 8:39 AM
Subject: RE: 2621/2610 router IOS selection for 12.2T home lab
Hi!
I hear that you can't use the latest/greatest on non-XM routers, unless
you boot from tftp.
Check this post:
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Brian McGahan
Sent: Tuesday, May 24, 2005 10:28 AM
To: Chad Hintz; Mathew; Cisco certification
Subject: RE: Command "ipv6 ospf" on 2600 with IOS 12.2(15)T15
You can boot the 2600XM enterprise plus image from TFTP to the 2610 or
2611 via the "tftpdnld -r" command in rommon.
HTH,
Brian McGahan, CCIE #8593
bmcgahan@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987 x 705
Outside US: 775-826-4344 x 705
24/7 Support: http://forum.internetworkexpert.com
Live Chat: http://www.internetworkexpert.com/chat/
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
ccielab@cox.net
Sent: Sunday, June 05, 2005 11:35 PM
To: ccielab@groupstudy.com
Subject: 2621/2610 router IOS selection for 12.2T home lab
Hello,
I have a 2621 64/16 and 2610 48/16. I do not see a Enterprise IOS
version
for 12.2T on CCO.
What would be the recommended IOS for these routers?
BTW, which IOS has ISIS, is it Enterprise Basic/IP Plus?
Thanks all.
This archive was generated by hypermail 2.1.4 : Wed Jul 06 2005 - 14:43:41 GMT-3