From: Kumar, Manoj (manoj.kumar@citigroup.com)
Date: Sat Jun 04 2005 - 09:35:54 GMT-3
Sorry James but I just remembered about 'output delay' command under router rip - is that what you are looking for ?
Kind Regards,
Manoj Kumar C.
EMEA Network Engineering
Citigroup Technology Infrastructure
Email: manoj.kumar@citigroup.com
Tel: +973-17-588-576
Mob: +973-39-412-286
Fax: +973-17-588-595
-----Original Message-----
From: James Gwede [mailto:ccie@webmail.co.za]
Sent: Saturday, June 04, 2005 3:33 PM
To: Kumar, Manoj; James Gwede; ccielab@groupstudy.com
Subject: Re: RIP question
No, the RIP update interval is 30 seconds. This is not the
answer to the question Kumar. Thanks the response though.
On Sat, 4 Jun 2005 13:02:19 +0100
"Kumar, Manoj" <manoj.kumar@citigroup.com> wrote:
> James,
>
> If I understood correctly, that is RIP update interval
>
> Regards,
> Manoj
>
> -----Original Message-----
> From: nobody@groupstudy.com
> [mailto:nobody@groupstudy.com]On Behalf Of
> James Gwede
> Sent: Saturday, June 04, 2005 2:53 PM
> To: ccielab@groupstudy.com
> Subject: RIP question
>
>
> Hi What do you change in RIP when the question reads
> "Ensure that if RIP updates are too large for one packet
> that the router will wait 40 milliseconds before sending
> the second packet of the update." Your response will be
> appreciated.
>
This archive was generated by hypermail 2.1.4 : Wed Jul 06 2005 - 14:43:40 GMT-3