From: gladston@br.ibm.com
Date: Thu Jun 02 2005 - 10:43:23 GMT-3
Do you know if it is possible to trust and police IN?
Just 'trust' work, but police with trust under the same policy applyed inbound does not work
It is not working:
mls qos map policed-dscp 3 to 2
!
class-map match-all Set-with-police
match access-group 121
!
policy-map Set-with-police
class Set-with-police
police 8000 8000 exceed-action policed-dscp-transmit
trust ip-precedence
!
cat2#sh run int fa 0/22
Building configuration...
Current configuration : 194 bytes
!
interface FastEthernet0/22
switchport trunk encapsulation isl
switchport mode trunk
switchport nonegotiate
no ip address
service-policy input Set-with-police
spanning-tree portfast
end
This archive was generated by hypermail 2.1.4 : Wed Jul 06 2005 - 14:43:40 GMT-3