Encapsulation Failed

From: Chris Aguillo (ccaguillo1@hotpop.com)
Date: Tue May 31 2005 - 09:53:04 GMT-3

• Next message: Chad Hintz: "Re: PBR Problems"
• Previous message: Andrew Bruce Caslow: "RE: Need help for NMC Workbook 8.1"
• Next in thread: Richard Dumoulin: "RE: Encapsulation Failed"
• Maybe reply: Richard Dumoulin: "RE: Encapsulation Failed"
• Maybe reply: Church, Chuck: "RE: Encapsulation Failed"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi Team,

Any comment on the encapsulation failed?

IP: tableid=0, s=127.0.0.1 (Serial0/1/0), d=192.168.5.112
GigabitEthernet0/1), routed via RIB
IP: s=127.0.0.1 (Serial0/1/0), d=192.168.5.112 (GigabitEthernet0/1),
g=192.168.5.112, len 40, forward
IP: s=127.0.0.1 (Serial0/1/0), d=192.168.5.112 (GigabitEthernet0/1), len
40, encapsulation failed

I have only simple configuration on my Serial0/1/0 and G0/1 and I have
this as my output of my debug ip packet...

thanks for the help...

• Next message: Chad Hintz: "Re: PBR Problems"
• Previous message: Andrew Bruce Caslow: "RE: Need help for NMC Workbook 8.1"
• Next in thread: Richard Dumoulin: "RE: Encapsulation Failed"
• Maybe reply: Richard Dumoulin: "RE: Encapsulation Failed"
• Maybe reply: Church, Chuck: "RE: Encapsulation Failed"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Fri Jun 03 2005 - 10:12:03 GMT-3