From: ccie2be (ccie2be@nyc.rr.com)
Date: Sun May 29 2005 - 19:11:09 GMT-3
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
gladston@br.ibm.com
Sent: Tuesday, September 14, 2004 5:21 PM
To: ccielab@groupstudy.com
Subject: Re: RIB Failure
========
... just want to know if they represent some thing "not good" (Fail) to the
lab procters?
========
It is difficult to know that. The best approach in such situation would be
ask the proctor.
There were Discussions about this topic (RIB failure) on the recent past.
As a summary, RIB Failure is normal behavior when IGP and iBGP announces the
same route. There are other cases where RIB Failure represents a problem.
I run on this on DOiT scenario. A groupstudy fellow also posted that there
is a InternetworkExpert scenario where this occurs.
Generally, you do not need to take care of it on the lab, but if that
bothers you, check with the proctor.
This archive was generated by hypermail 2.1.4 : Fri Jun 03 2005 - 10:12:03 GMT-3