From: Robin Johnson (Rob.Johnson@dxi.net)
Date: Thu May 26 2005 - 17:41:38 GMT-3
you need to append the group number even if the group is 0
unlike hsrp vrrp doesnt default to group 0
example
interface FastEthernet1/0.10
encapsulation dot1Q 222
vrrp 0 ip 1.1.1.1
-----Original Message-----
From: ccie2be [mailto:ccie2be@nyc.rr.com]
Sent: 26 May 2005 21:11
To: Group Study
Subject: VRRP on sub-interface problem
Hi guys,
I'm trying to configure VRRP on a fast ethernet subinterface but it's not
working.
interface FastEthernet1/0/0.136
encapsulation dot1Q 136
ip address 145.7.136.6 255.255.255.0
end
R6(config-subif)#int fa1/0/0.136
R6(config-subif)#vr
R6(config-subif)#vr?
% Unrecognized command
R6(config-subif)#vrrp ip 145.7.136.245
^
% Invalid input detected at '^' marker.
Any ideas why this is and how I should work around this issue?
TIA, Tim
This archive was generated by hypermail 2.1.4 : Fri Jun 03 2005 - 10:12:02 GMT-3