From: Guyler, Rik (rguyler@shp-dayton.org)
Date: Wed May 25 2005 - 12:47:07 GMT-3
Gee, that looks pretty normal to me. I don't think I've ever looked at one
of our closet switches and not seen the CPU running in that range of
utilization.
Rik
-----Original Message-----
From: Cisco_D [mailto:dp_walsh@eircom.net]
Sent: Wednesday, May 25, 2005 11:37 AM
To: cisco@groupstudy.com
Subject: 3500XL CPU Utilisation [7:99676]
I have a problem with a 3500XL CPU running at 55%+ all of the time. I have
issued the sh proc cpu command as below:
SW1#sh proc cpu
CPU utilization for five seconds: 58%/8%; one minute: 58%; five minutes: 58%
I have excluded the full output of the command but it does not show the
level of use that is being shown in the summary above. The highest use by
any single object is 15% (Port Monitoring) and the rest (84
Processes) mostly say 0%. Between the other processes there is approx.
another 5% - 10% usage.
Can anyone point me in the right direction to troubleshoot high CPU usage
and how to decipher the output of the above command.
Thanks in advance,
Derek
This archive was generated by hypermail 2.1.4 : Fri Jun 03 2005 - 10:12:02 GMT-3