From: gladston@br.ibm.com
Date: Wed May 25 2005 - 09:46:37 GMT-3
Correcting my last post...
It does not matter if changing the AD of the route learned through BRI.
It still chooses the Intraarea route, even though the AD is worst then Interarea:
Rack2R4#sir 142.20.5.1
Routing entry for 142.20.5.1/32
Known via "ospf 1", distance 110, metric 1627, type inter area
Last update from 142.20.14.1 on Serial0/0, 00:00:38 ago
Routing Descriptor Blocks:
* 142.20.14.1, from 142.20.1.1, 00:00:38 ago, via Serial0/0
Route metric is 1627, traffic share count is 1
Rack2R4#
Rack2R4#c
Enter configuration commands, one per line. End with CNTL/Z.
Rack2R4(config)#int bri 0/0
Rack2R4(config-if)#no sh
Rack2R4#sir 142.20.5.1
Routing entry for 142.20.5.1/32
Known via "ospf 1", distance 111, metric 1001, type intra area
Last update from 142.20.45.5 on BRI0/0, 00:01:41 ago
Routing Descriptor Blocks:
* 142.20.45.5, from 142.20.5.1, 00:01:41 ago, via BRI0/0
Route metric is 1001, traffic share count is 1
This archive was generated by hypermail 2.1.4 : Fri Jun 03 2005 - 10:12:02 GMT-3