From: john matijevic (john.matijevic@gmail.com)
Date: Wed May 25 2005 - 08:12:45 GMT-3
Hello Nguyen,
Here is an example of a configuration of a concentrator to a firewall.
http://www.cisco.com/en/US/products/hw/vpndevc/ps2284/products_configuration_
example09186a00800949d2.shtml
http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_
example09186a0080094cf8.shtml
http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_exampl
e09186a00800949f1.shtml
http://www.cisco.com/en/US/products/hw/vpndevc/ps2301/products_configuration_
example09186a0080093f6b.shtml
If you need additional assistance, please contact offline.
Sincerely,
John
On 5/25/05, Nguyen Hoa <hoanh.it@ct-in.com.vn> wrote:
>
> Hi all
>
> I have one PIX for Firewall function and one VPN Concentrator 3030 for
> remote-access VPN connections
>
> How can I deploy this case ?
>
> 1. PIX place parallel with Concentrator
> 2. Concentrator place behind PIX
>
> Which solution is better and easy to config ? And where could I find the
> config template for this scenario ?
>
> Tks !
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
-- John Matijevic, CCIE #13254 U.S. Installation Group Senior Network Engineer 954-969-7160 ext. 1147 (office) 305-321-6232 (cell)
This archive was generated by hypermail 2.1.4 : Fri Jun 03 2005 - 10:12:01 GMT-3