ipv6 ospf

From: Lanny Ballard (lanny26ga@hotmail.com)
Date: Tue May 24 2005 - 20:50:39 GMT-3

• Next message: Guyler, Rik: "RE: Command "ipv6 ospf" on 2600 with IOS 12.2(15)T15"
• Previous message: Brian McGahan: "RE: Command "ipv6 ospf" on 2600 with IOS 12.2(15)T15"
• Next in thread: Sean C: "Re: ipv6 ospf"
• Maybe reply: Sean C: "Re: ipv6 ospf"
• Maybe reply: Lanny Ballard: "Re: ipv6 ospf"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

I'm trying to get ospf running over an ipv6 tunnel
I'm using a 6to4 tunnel, and i can ping each end.
My understanding is that automatic tunnels are treated as nbma or
point-to-multipoint

I noticed under sh ipv6 ospf int, that the tunnel was considered as
point-to-point even after I enabled ospf on it. I changed the network type
to point-to-multipoint with no luck. I then changed it to Non-broadcast and
manually configured ipv6 ospf neighbors, but still no luck, they got stuck
in the Exstart state. They kept on retransmitting the DBDs, it was like the
DBDs got lost or something. It is not an MTU error, seeing as how I have
ipv6 ospf mtu-ignore on both sides of the tunnel.

I think I'm just missing a basic configuration here. Can someone help?

TIA
Lanny

• Next message: Guyler, Rik: "RE: Command "ipv6 ospf" on 2600 with IOS 12.2(15)T15"
• Previous message: Brian McGahan: "RE: Command "ipv6 ospf" on 2600 with IOS 12.2(15)T15"
• Next in thread: Sean C: "Re: ipv6 ospf"
• Maybe reply: Sean C: "Re: ipv6 ospf"
• Maybe reply: Lanny Ballard: "Re: ipv6 ospf"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Fri Jun 03 2005 - 10:12:01 GMT-3