From: Bob Sinclair (bsin@cox.net)
Date: Mon May 23 2005 - 16:04:40 GMT-3
Hi Dennis,
When you say "running OSPF between two tunnels" do you mean between two
tunnel interfaces? If so, DOiT lab 2 has an example of running OSPF V3 over a
dynamic tunnel. Also, DOiT Lab 5 has an interesting example of running OSPF
over an unnumbered tunnel in order to satisfy a VPN requirement.
HTH,
Bob Sinclair
CCIE #10427, CCSI 30427, CISSP
www.netmasterclass.net
----- Original Message -----
From: Dennis J. Hartmann
To: ccielab@groupstudy.com
Sent: Monday, May 23, 2005 11:56 AM
Subject: Tunnel Interface with OSPF
Does anyone have an example of a tunnel interface configuration with
OSPF running between the two tunnels? If you have a reference to a
NetMasterClass or InternetworkExpert lab number, that would be helpful as
well. Thanks.
Sincerely,
Dennis J. Hartmann
White Pine Communications
CCSI#23402/CCIP/CCNP/CCDP/CCNA/CCDA
Cisco IP Voice Support & Design Specialist
Cisco Optical, VPN & IDS Specialist
MCSE
_______________________________________________________________________
Subscription information may be found at:
http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Jun 03 2005 - 10:12:00 GMT-3