From: san (san.study@gmail.com)
Date: Sat May 21 2005 - 13:38:32 GMT-3
Scenario:
R4-------------R1----------------R5
All running eigrp AS 1024
All running on Main interface, one network, NBMA
question:
-----------
If i do sh ip inter s0/0 on R1, I see split horizon is
disabled....But why would i need to disable again with
"no ip split horizon eigrp 1024" on inter s0/0 on R1, so that R5 sees
R4's routes ?
Is it specific to eigrp ? or all distance vector IGPs ?
Thanks in Advance
/SAN
This archive was generated by hypermail 2.1.4 : Fri Jun 03 2005 - 10:12:00 GMT-3