From: T. N. Noble (noble@inserviceindia.com)
Date: Thu May 19 2005 - 05:26:07 GMT-3
Hi Bob,
Thank you very much. I found it in the URL that you provided.
Once again thanks for all who tried to help.
Regards,
Noble
-----Original Message-----
From: Bob [mailto:cciebob@comcast.net]
Sent: 19 May 2005 10:44
To: thomwin_chen@yahoo.com; noble@inserviceindia.com; ccie@maitruongxua.com;
simon.hart@btinternet.com
Cc: ccielab@groupstudy.com
Subject: RE: ACLs - CCO URL
The information is there, it just buried deep.
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fibm
_c/bcfpart1/bcfsrb.htm#wp1003023
When using the documentation website, don't forget that there is valuable
information under the "index" link.
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fibm
_c/index.htm
-Bob
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Thomwin Chen
Sent: Wednesday, May 18, 2005 11:03 PM
To: T. N. Noble; 'Jacky Murphy'; 'simon hart'
Cc: 'GroupStudy - Posting'
Subject: RE: ACLs - CCO URL
Hi Noble,
yup, I couldn't find it in CCO.
but in the Technology Support there is plenty information about this.
http://www.cisco.com/en/US/tech/tk331/tk336/technologies_tech_note09186a0080
0fad74.shtml
list of common SAP :
http://www.cisco.com/en/US/tech/tk870/tk451/tk374/technologies_tech_note0918
6a0080094226.shtml
regards
"T. N. Noble" <noble@inserviceindia.com> wrote:
Hello,
Thanks for u r responses. I think I was not so specific about my requirement
in the last mail. I am looking forward to use these ACLs (Filtering NETBIOS
etc. ) with dlsw remote-peer statements. I find difficult to remember all
the different hex numbers (to make the matching combination) along with
these ACLs and hence thought that it will be a better idea to know the CCO
links for this.
Thanks,
Noble
-----Original Message-----
From: Jacky Murphy [mailto:ccie@maitruongxua.com]
Sent: 18 May 2005 13:27
To: Jacky Murphy; T. N. Noble; 'GroupStudy - Posting'
Subject: Re: ACLs - CCO URL
Hi,
this is Transparent Bridging Commands:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/12cgcr/ibm_r
/brprt1/brtb.htm
Jacky
----- Original Message -----
From: "Jacky Murphy"
To: "T. N. Noble" ; "'GroupStudy - Posting'"
Sent: Wednesday, May 18, 2005 5:19 PM
Subject: Re: ACLs - CCO URL
> Hi,
>
> try this:
> Layer 2 Acess Control List
>
http://www.cisco.com/en/US/products/ps5853/products_configuration_guide_chap
ter09186a008043be5f.html
>
> <200 - 299>
> Apply to interface bridge-group [input] > input-type-list>
>
> <700 - 799>
> Apply to interface bridge-group [input] > output-address-list>
>
>
>
> Jacky
>
> ----- Original Message -----
> From: "T. N. Noble"
> To: "'GroupStudy - Posting'"
> Sent: Wednesday, May 18, 2005 4:48 PM
> Subject: ACLs - CCO URL
>
>
>> Hello,
>>
>> I am not able to find the CCO documentation link for the following
>> ACL types. Can anyone help me by pointing to a CCO URL?
>>
>> <200-299> Protocol type-code access list <700-799> 48-bit MAC address
>> access list
>>
>> Thanks,
>>
>> Noble
>>
>> _____________________________________________________________________
>> __ Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>
> ______________________________________________________________________
> _ Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Jun 03 2005 - 10:11:59 GMT-3