From: Shanky (shankyz@gmail.com)
Date: Thu May 19 2005 - 02:12:12 GMT-3
Hi,
You can't recover a lost encrypted password , that means even if you
disable the password encryption, the password is not displayed in the
unencrypted form in the config. But any new passwords that you create
after no service passord-encryption, will not be encrypted.
Refer here ... http://www.cisco.com/univercd/cc/td/doc/product/software/ios123/123cgcr/secur_r/sec_r1g.htm#wp1070450
Tks
On 5/19/05, TiuN Hong Leng <hongleng@ms73.hinet.net> wrote:
> Hi,
>
> The initial configuration is:
>
> no service password-encryption
> line vty 0 4
> password cisco
>
>
> After using "service password-encryption":
>
> service password-encryption
> line vty 0 4
> password 7 045802150C2E
>
>
> Use "no service password-encryption":
>
> no service password-encryption
> line vty 0 4
> password 7 045802150C2E
>
> The password does no unencrypted!!! Why?
>
> Is it a IOS bug?
>
> Thanks a lot!
> Regards,
> Huang-Leng, Chang
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Jun 03 2005 - 10:11:59 GMT-3