From: Mark Lasarko (mlasarko@co.ba.md.us)
Date: Tue May 17 2005 - 10:00:08 GMT-3
Now I'm curious...
I am used to seeing (and configuring)
ip rtp priority 16384 16383 <bw_in_kbps>
I have seen ip rtp priority 16384 16380 <bw_in_kbps>
in some older (12.0) documentation
However, everything I have seen since 12.1
has been ip rtp priority 16384 16383...
So which is it - 16383 or 16380?
Did the ports change??
Did I miss that memo?
~M
>>> "Lanny Ballard" <lanny26ga@hotmail.com> 05/17/05 8:44 AM >>>
OK, let's see if I can get this one right this time :)
16384 is where the ports start
16380 is the range of ports
16384 + 16380 = 32764
and of course 512 is the max allowed bandwidth in Kpbs
HTH!
>From: Lee Donald <Lee.Donald@t-systems.co.uk>
>Reply-To: Lee Donald <Lee.Donald@t-systems.co.uk>
>To: ccielab@groupstudy.com
>Subject: Frame-relay ip rtp priority (16383 16380) 512
>Date: Tue, 17 May 2005 13:29:40 +0100
>
>Hi All,
>
>Can anybody explain the range in brackets in the above line.
>
>I don't know where the range is specified and what the numbers in the
>brackets above specify.
>
>According to the doc cd, this frame rtp command line gives strict priority
>to voice between the udp ports of 16383 to 32764, but I don't know how the
>range of udp ports are specified.
>
>
>This is my class
>
>map-class frame-relay voip
>frame-relay cir 256000
>frame-relay bc 2560
>frame-relay be 600
>frame-relay mincir 256000
>no frame-relay adaptive-shaping
>frame-relay fair-queue
>frame-relay fragment 250
>frame-relay ip rtp priority 16384 16380 512
>
>
>
>
>Anyone know ?
>
>Thanks.
>
>Lee.
>
>_______________________________________________________________________
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Jun 03 2005 - 10:11:58 GMT-3