From: Marvin Greenlee (marvingreenlee@yahoo.com)
Date: Tue May 17 2005 - 01:10:41 GMT-3
Do you have a Simulator with both S/T and U
interfaces? The BRI interface on the 2503 is a S/T.
Marvin Greenlee, CCIE #12237
Network Learning, Inc.
--- Matthew Seppeler <Matt.Seppeler@InetX.com> wrote:
> I'm having difficulties trying to get my ISDN
> Simulator to work with a WIC-1B-U. The simulator is
> an Astricom B-LinkU and one WIC-1B-U is in a 2610
> and the other in a 3640. Both routers are on the
> Enterprise Basic version of 12.2.(15)T. A show ver
> on both routers should the cards as good and lets me
> configure them in the IOS.
>
> The problem lies at layer 1. It should only require
> a straight through cable to connect but am getting
> no link light. The WIC-1B-U does not require an
> external NT1, only the ST version of the card. When
> I connect to the simulator I get nothing.
>
> The simulator works fine as I get link connectivity
> when I plug it in to 2503 and get layer 1
> connectivity.
>
> Any help or pointers would be greatly appreciated.
>
> Matt
>
>
This archive was generated by hypermail 2.1.4 : Fri Jun 03 2005 - 10:11:58 GMT-3