From: 22Cent@gmail.com
Date: Sun May 15 2005 - 21:43:05 GMT-3
Thanks for the reply. The documentation website mentions the following "
You cannot set the administrative distance in EIGRP against certain
routes or sources, as you can with other protocols. The command does
not work this way with EIGRP. "
This is a little confusing. Can someone confirm if " distance <AD>
<neighbor-IP> 0.0.0.0 <ACL> " command works against certain routes and
or sources?
TIA
Ray
On 5/15/05, Paresh Khatri <Paresh.Khatri@aapt.com.au> wrote:
> Ray,
>
> Yes. You can do something like this:
>
> distance <AD> <neighbor-IP> 0.0.0.0 <ACL>
>
> HTH,
> Paresh
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> 22Cent@gmail.com
> Sent: Monday, 16 May 2005 08:39 AM
> To: Group Study
> Subject: EIGRP distance applied to neighbor
>
> Hello Group,
> Can anyone confirm if the eigrp distance command can be applied to a
> specific neighbor using an access-list to change one advertised
> network? Any help would be great.
>
> TIA
> Ray
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
> This communication, including any attachments, is confidential. If
> you are not the intended recipient, you should not read it - please
> contact me immediately, destroy it, and do not copy or use any part of
> this communication or disclose anything about it.
This archive was generated by hypermail 2.1.4 : Fri Jun 03 2005 - 10:11:58 GMT-3