From: Long Kwok (lkwok@ccieunix.com)
Date: Sun May 15 2005 - 13:10:22 GMT-3
Here is the link again , it is in the "FRTS MQC Prerequsite" Section .
It explicitly states that you must apply your FRTS shaping commands
within the class class-default within your policy map ? I wonder why ??
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122newft
/122t/122t13/frqosmqc.htm
TIA , Long
-----Original Message-----
From: Steve Ohnmacht [mailto:ohnmacht@gmail.com]
Sent: Sunday, May 15, 2005 9:01 AM
To: Long Kwok
Cc: ccielab@groupstudy.com
Subject: Re: Using MQC framework for FRTS
My understanding is that, the class "class-default" is there to
classify the rest of your traffic (default traffic). For some reason,
when creating your policies you cant do class ? to see the
"class-default" class option. You have to type it out...
That's prolly an oversimplified view... As far as a deep
understanding as to why this is so, <shrug>... :-) Anyone else care to
shed some light on this?
On 5/14/05, Long Kwok <lkwok@ccieunix.com> wrote:
> According to cco docs , that when using the MQC framework to configure
> your FRTS settings , you must use the class class-default does anyone
> understand why this is so ? or if it is accurate ?
>
> TIA , Long
>
>
This archive was generated by hypermail 2.1.4 : Fri Jun 03 2005 - 10:11:58 GMT-3