From: Andy (trung@vnsystem.net)
Date: Sat May 14 2005 - 14:20:16 GMT-3
Hi,
This, i think is a very straightforward question.
R1 should be configured with 2 sub-interface. One is multipoint and the
other is point-to-point.
You will need to enter the map command to make it work properly.
Andy
----- Original Message -----
From: "k c" <jwongccie@yahoo.com.hk>
To: <ccielab@groupstudy.com>
Sent: Saturday, May 14, 2005 12:09 PM
Subject: Frame Relay mp/p2p Questions
> Hi Group,
>
> R1 (172.16.123.1/172.16.14.1), R2 (172.16.123.2), R3 (172.16.123.3), R4
> (172.16.14.4).
> R1 is Hub, R2 & R3 are spokes within 172.16.123.0 subnet.
> "One and only one router must configured with two and only two logical FR
> interfaces. The three remaining routers with FR interfaces must use
> physical interfaces only. The logical interfaces must be of a different
> type"
>
> Obviously, R1 will be configured with one mp (connect to R2 and R3) and
> one p2p connect to R4, however, R2-R4 should be physical interfaces. Any
> hints?
>
> Thanks.
>
>
> ---------------------------------
> 7Q'Y.I&,(l7s email 3q*>!H
> $U8| Yahoo! Messenger
> http://messenger.yahoo.com.hk
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Jun 03 2005 - 10:11:58 GMT-3