From: eward15@juno.com
Date: Thu May 12 2005 - 21:38:07 GMT-3
Why not make use this configuration:
R2 - Vlan2 - Sw1 - Vlan2 - Vlan 200 - Sw2 - Vlan 200 - BB2
Do not tag the traffic. Make all the ports access ports. The traffic will just pass through. What does the group think?
Eugene Ward
------------------------------------------------------------------------
>>
>> No BVI. Here is the task for the benefit of the group:
>>
>> 1.4. The port attached to R2 on SW1 is assigned to VLAN 2, while the
port
>> attached to BB2 on SW2 is assigned to VLAN 200. Configure the network
so
>> that when SW2 receives a broadcast frame originated in VLAN 2 on SW1 it
>> is
>> forwarded to BB2, and when SW1 receives a broadcast frame originated in
>> VLAN
>> 200 on SW2 it is forwarded to R2.
>>
>> 4 Points
>>
>>
This archive was generated by hypermail 2.1.4 : Fri Jun 03 2005 - 10:11:57 GMT-3