From: ccie zeng (ccie.candidate@gmail.com)
Date: Thu May 12 2005 - 17:35:17 GMT-3
Hi Brian:
I have tried leave the name off when doing callback with ppp, it does
not work, I have add it and class CALLBACK, then it works, did I
misunderstand your point?
Thanks
Zeng
On 5/12/05, Brian Dennis <bdennis@internetworkexpert.com> wrote:
> Zeng,
> As a rule of thumb, do not leave off the dial number in the
> dialer map. You can experience inconsistent problems with connectivity
> when leaving it off (different configurations, IOS versions, etc).
> Anything that doesn't work 100% of the time should not be used in the
> lab.
>
> As far as the name in the dialer map goes, try leaving it off
> when doing PPP callback.
>
> Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
>
> bdennis@internetworkexpert.com
> Internetwork Expert, Inc.
> http://www.InternetworkExpert.com
> Toll Free: 877-224-8987
> Direct: 775-745-6404 (Outside the US and Canada)
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> ccie zeng
> Sent: Thursday, May 12, 2005 12:12 PM
> To: Cisco certification
> Subject: ISDN name and dialing number
>
> Hi:
> Could any one tell me in the dialer map of ISDN, when should I use key
> word "name" and when it is not necessary, and when I must include
> dialing number, and when I can skip the dialing number.
>
> It seems to me as long as you want to make traffic as interesting
> traffic, you need to include dialing number. other cases not necessary
> like map clns. How about the name then? It looks like even if I use
> wrong name the link will come up too.
>
> Thanks
> Zeng
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Jun 03 2005 - 10:11:57 GMT-3