From: Brian Dennis (bdennis@internetworkexpert.com)
Date: Thu May 12 2005 - 16:56:35 GMT-3
John,
Here is the link to the DocCD explanation for BGP path
selection:
How BGP Selects Paths
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/
fipr_c/ipcprt2/1cfbgp.htm#wp1000898
7. If the autonomous system path length is the same, prefer the route
with the lowest origin code (IGP < EGP < INCOMPLETE).
Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
bdennis@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987
Direct: 775-745-6404 (Outside the US and Canada)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
John Matus
Sent: Thursday, May 12, 2005 12:43 PM
To: ccielab@groupstudy.com
Subject: bgp orignin incomplete
bgp perfers an internal path over an incomplete path..........or is it
the
other way around?
This archive was generated by hypermail 2.1.4 : Fri Jun 03 2005 - 10:11:57 GMT-3