From: Hogo, Trust (trust.hogo@sarcom.com)
Date: Wed May 11 2005 - 19:05:25 GMT-3
Hope this might help.
http://www.cisco.com/warp/public/788/products/vwicmf_t1.html
http://www.cisco.com/warp/public/63/wic-1dsu-t1.html
------
HQ
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Anthony Pace
Sent: Wednesday, May 11, 2005 4:50 PM
To: Group Study
Subject: T1 delievered on 2 wires or 4???
I recently terminated a T1 and ISDN PRI in a remote location and was
able to see that the TELCO had terminated the T1 using a single pair and
the PRI using a single pair from the 25 pair bundle coming into the Data
Center's smart jacks.
I was always under the impression that from the CSU/DSU (in my case it
was built into the router) to the smartjack and subsequently the NI card
in the MPO was 4 wires. 1 pair TX and 1 pair RX.
Maybe between the CSU/DSU and the NI card it's 2 wires and then 4 for
the distance to the CO? ??? I am confused because I always believed that
DSL was born out of the efforts of finding a single pair alternative to
T1 technology.
Should PRI and DS1 be 1 pair or 2?
Anthony Pace CCIE 10349
-- Anthony Pace anthonypace@fastmail.fm
This archive was generated by hypermail 2.1.4 : Fri Jun 03 2005 - 10:11:57 GMT-3