From: mani poopal (mani_ccie@yahoo.com)
Date: Tue May 10 2005 - 15:09:18 GMT-3
Hi Guyse,
In the following igmp profile (equivalent to L3 method of ip igmp access-group) example, if we configure deny a range say 229.9.9.0, what will happen to other rage, are they allowed by default or like access-list there is an implicit deny and the following commands deny all group access to fast ethernet port.
=====================================
Switch # config t
Switch(config) # ip igmp profile 4
Switch(config-igmp-profile)# deny
Switch(config-igmp-profile)# range 229.9.9.0
Switch(config)# interface fastethernet2/12
Switch(config-if)# ip igmp filter 4
======================================
Mani
B.ENG,A+,CCNA,CCNP,CCNP-VOICE, CSS1,CNA,MCSE
(416)431 9929
MANI_CCIE@YAHOO.COM
---------------------------------
Yahoo! Mail
Stay connected, organized, and protected. Take the tour
This archive was generated by hypermail 2.1.4 : Fri Jun 03 2005 - 10:11:57 GMT-3