From: Revaz Kashia (office2003@gol.ge)
Date: Tue May 10 2005 - 12:40:51 GMT-3
Nothing i just want to shape the traffic to 2 Mbps
----- Original Message -----
From: "Sean C" <Upp_and_Upp@hotmail.com>
To: "George Vardishvili" <office2003@gol.ge>; "Group Study"
<ccielab@groupstudy.com>
Sent: Tuesday, May 10, 2005 6:16 PM
Subject: Re: help with shaping on cisco 3550
> George,
>
> Are you matching anything in your class-maps? You need to define
> something to match inside the class-map.
> ----- Original Message -----
> From: "George Vardishvili" <office2003@gol.ge>
> To: "Group Study" <ccielab@groupstudy.com>
> Sent: Tuesday, May 10, 2005 3:57 AM
> Subject: help with shaping on cisco 3550
>
>
>> Hello
>>
>> one question
>> i want to shape in & out traffic on cisco 3550 port
>> i have the config :
>>
>> class-map match-all test-tx
>> class-map match-all test-rx
>>
>> policy-map test-tx
>> class test-tx
>> police 2000000 20000 exceed-action drop
>> policy-map test-rx
>> class test-rx
>> police 2000000 20000 exceed-action drop
>>
>> interface FastEthernet0/4
>> description test porti
>> no switchport
>> ip address 192.168.1.1 255.255.255.252
>> service-policy input test-tx
>> service-policy output test-rx
>>
>> is this config correct ???? becouse i`m testing shaping using reget and
>> i`m
>> downloading file on 600 kbps but as you see i`m shaping it on 2 Mbps
>> where is
>> the mistake, can you offer better solution
>> any help appricialted
>>
>> Thanks in Advance
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Jun 03 2005 - 10:11:57 GMT-3