From: Sean C (Upp_and_Upp@hotmail.com)
Date: Tue May 10 2005 - 10:16:35 GMT-3
George,
Are you matching anything in your class-maps? You need to define something
to match inside the class-map.
----- Original Message -----
From: "George Vardishvili" <office2003@gol.ge>
To: "Group Study" <ccielab@groupstudy.com>
Sent: Tuesday, May 10, 2005 3:57 AM
Subject: help with shaping on cisco 3550
> Hello
>
> one question
> i want to shape in & out traffic on cisco 3550 port
> i have the config :
>
> class-map match-all test-tx
> class-map match-all test-rx
>
> policy-map test-tx
> class test-tx
> police 2000000 20000 exceed-action drop
> policy-map test-rx
> class test-rx
> police 2000000 20000 exceed-action drop
>
> interface FastEthernet0/4
> description test porti
> no switchport
> ip address 192.168.1.1 255.255.255.252
> service-policy input test-tx
> service-policy output test-rx
>
> is this config correct ???? becouse i`m testing shaping using reget and
> i`m
> downloading file on 600 kbps but as you see i`m shaping it on 2 Mbps where
> is
> the mistake, can you offer better solution
> any help appricialted
>
> Thanks in Advance
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Jun 03 2005 - 10:11:57 GMT-3