From: mani poopal (mani_ccie@yahoo.com)
Date: Tue May 10 2005 - 08:33:22 GMT-3
Hi Guys,
In NTP one side is a NTP master say R1, other router can be ntp server R1 or ntp peer R1, if nothing is specified about the ntp relationship, what option is preferred, ntp peer 10.1.1.1 or ntp server 10.1.1.1(10.1.1.1) is the loopback address of R1.
thanks
Mani
Scott Morris <swm@emanon.com> wrote:
Configuration Fundamentals --> System Management --> Basic System Management
Commands
Or the same structure in the configuration guide section.
Or, when in doubt, load the IOS Master Index, wait for it to load (it's
big), press Ctrl-F in your browser and search for NTP then click on the
link. :)
Play around, search a little. But KNOW the CD for your exam.
Scott
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Marakalas
Sent: Tuesday, May 10, 2005 7:10 AM
To: ccielab@groupstudy.com
Subject: NTP information on CCO
Hi, how do I find information about the NTP on the CCO? Your assistance will
be highly appreciated.
__________________________________
Do you Yahoo!?
Yahoo! Small Business - Try our new resources site!
http://smallbusiness.yahoo.com/resources/
This archive was generated by hypermail 2.1.4 : Fri Jun 03 2005 - 10:11:57 GMT-3