From: ccie2be (ccie2be@nyc.rr.com)
Date: Sun May 08 2005 - 10:12:28 GMT-3
Long,
I'm pretty sure (99%) there is no difference.
Deprecated syntax or commands might show up for a while in IOS before being
removed.
HTH, Tim
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of Long
Kwok
Sent: Sunday, May 08, 2005 12:44 AM
To: ccielab@groupstudy.com
Subject: Difference within the MQC framework of set dscp and set ip dscp
In this cco doc it states that as of 12.2(14)T some policy-map commands
were modified some of them being the following:
Old command = set ip prec / new command = set prec
Old command = set ip dscp / new command = set dscp
These are all subcommands underneath the policy-map structure , I have
used both of them and see know difference between the two commands , and
find it perplexing as why cisco would document a change of a given
command but still include the deprecated syntax ??? Anyone seen this ??
This is on a 3640 platform with the following code System image file is
"flash:c3640-jk9o3s-mz.123-11.T3.bin" ..
TIA , Long
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122newft
/122t/122t13/ftenpkmk.htm
This archive was generated by hypermail 2.1.4 : Fri Jun 03 2005 - 10:11:57 GMT-3