From: Gary Cheung (garymsue@netvigator.com)
Date: Sun May 08 2005 - 08:29:06 GMT-3
Simon
So, it's better to type "bgp bestpath as-path ignore +univercd" in the Cisco Search to get it.
Gary
-----Original Message-----
From: simon hart [mailto:simon.hart@btinternet.com]
Sent: Sunday, May 08, 2005 7:18 PM
To: Gary Cheung; ccielab@groupstudy.com
Subject: RE: Missing command in both CCO IOS 12.2 and 12.3
Gary,
I notice from your links that the bgp bestpath as-path ignore is still not
in the command list.
S.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of Gary
Cheung
Sent: 08 May 2005 11:33
To: ccielab@groupstudy.com
Subject: Missing command in both CCO IOS 12.2 and 12.3
When you search this command "bgp enforce-first-as" in CCO, you can't find
it in both 12.2 and 12.3, however this command had been released for many
years.
http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120
limit/120s/120s3/s_befasp.htm
I am glad because you can search this command in the newly published 12.4.
http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124cr/hirp_r
/rte_bgh1.htm
Besides, you couldn't search "bgp bestpath as-apth ignore" in the Command
Master List of 12.2 and 12.3. I think there are still many missing commands
.........
So, I suggest you use the router in lab to search the command first and then
type the command with "+univercd" in Cisco Search to get the explanation.
Gary
This archive was generated by hypermail 2.1.4 : Fri Jun 03 2005 - 10:11:57 GMT-3