From: Rajagopal S (raj_ccie@yahoo.com)
Date: Fri May 06 2005 - 03:37:42 GMT-3
Thanks for the answers. Brian, modem negotiation is fine.. i can see that in the debugs in the router.. i think the problm is with the router config.. Tomaz, i dont have the autoselect ppp command in my router. can this be a problem with the ios ?? any other clues ??
Raj
Brian McGahan <bmcgahan@internetworkexpert.com> wrote:
Are you sure the modem has the correct chat script? Reverse
telnet to it and type "ATZ" then "ATD". If you hear a dialtone you know
the modem to telco connection is good. They type "ATS0=1" to tell the
modem to answer after one ring. Call it from a regular phone and see if
it answers. If you get this far then you know the problem is your
router config and not the modem.
HTH,
Brian McGahan, CCIE #8593
bmcgahan@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987 x 705
Outside US: 775-826-4344 x 705
24/7 Support: http://forum.internetworkexpert.com
Live Chat: http://www.internetworkexpert.com/chat/
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
Of
> Rajagopal S
> Sent: Thursday, May 05, 2005 4:24 AM
> To: ccielab@groupstudy.com
> Subject: Cisco 805 async dialup...
>
> Hi all..
>
> Need some help here.. i have a 805 router with a serial int. need
async
> connections on this router. so, i have connected a modem to the serial
int
> for dial in connections, & connected the phone line onto the modem..
>
> Now, for some reason, the calls arent landing, though the router has
> detected the modem type/speed etc.
>
> my configs on the serial are
>
> int serial 0
> physical layer async
> ip unnumbered ethernet0
> dialer in-band
> async mode interactive
> async default routing
> encap ppp
> ppp authentication chap
> peer default ip address 1.1.1.1
>
> line tty 1
> modem inout
> login local
> modem autoconfigure discovery
> transport input all
> flowcontrol hardware
>
> username test password test.
>
> am not getting any useful info on the debugs. i did a debug all, and
could
> see the tty coming up/going down. thats it.
>
> am i missing something ? can anybody guide me ???
>
> Raj
>
>
> __________________________________________________
> Do You Yahoo!?
> Tired of spam? Yahoo! Mail has the best spam protection around
> http://mail.yahoo.com
>
>
This archive was generated by hypermail 2.1.4 : Fri Jun 03 2005 - 10:11:56 GMT-3