From: John Matus (john_matus@hotmail.com)
Date: Thu May 05 2005 - 15:39:10 GMT-3
ok, standard dot1x port authentication via radius. <this is an internetwork
expert config>
when you create the group "dot1x" in the command "aaa authentication dot1x
group radius", don't you have to define or 'call' that group somewhere else
in some other statement in order for this to work? perhaps there is a group
'dot1x' located on the radius server??
TIA.
dot1x sys-authencontrol
it fa0/1
dot1x port-control auto
aaa new-model
aaa authentication login default none
aaa authentication dot1x group radius
radius-server host 1.2.3.4 key 1
This archive was generated by hypermail 2.1.4 : Fri Jun 03 2005 - 10:11:56 GMT-3