From: Kumar, Manoj (manoj.kumar@citigroup.com)
Date: Thu May 05 2005 - 05:30:38 GMT-3
Gents,
In my lab, I have a topology where R2 is the FR hub and R5, R6 form the spokes. I got to run OSPF and R2 and R5 form OSPF neighbors over FR with no issues, R6 is getting stuck at EXSTART with both R5 and R6 over FR. R6 is forming OSPF with R5 over ETHERNET with no issues.
I tried neighbor commands between R2 & R6, R5 & R6.
I tried 'ip ospf network point-to-multipoint non-broadcast on all three routers' FR interfaces
Please help and the config for R2 & R6 is given below.
R2#sh running-config
Building configuration...
Current configuration : 2538 bytes
!
version 12.2
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname R2
!
!
ip subnet-zero
!
!
!
!
call rsvp-sync
!
!
!
!
!
!
!
!
interface Loopback0
description *** LOOPBACK FOR R2 ***
ip address 200.0.0.2 255.255.255.255
!
interface Loopback1
ip address 172.16.0.1 255.255.0.0
!
interface FastEthernet0/0
no ip address
duplex auto
speed auto
!
interface Serial0/0
no ip address
encapsulation frame-relay
no fair-queue
no arp frame-relay
cdp enable
no frame-relay inverse-arp
frame-relay lmi-type cisco
!
interface Serial0/0.24 point-to-point
ip address 150.50.24.2 255.255.255.0
ip policy route-map greenandgold
no arp frame-relay
frame-relay interface-dlci 104
!
interface Serial0/0.256 multipoint
ip address 150.50.100.2 255.255.255.224
ip ospf network point-to-multipoint
no arp frame-relay
frame-relay map ip 150.50.100.2 105
frame-relay map ip 150.50.100.5 105 broadcast
frame-relay map ip 150.50.100.6 106 broadcast
no frame-relay inverse-arp
!
interface FastEthernet0/1
description *** LAN CONN TO R1-FE0-0 ***
ip address 150.50.17.2 255.255.255.0
ip policy route-map greenandgold
duplex auto
speed auto
!
interface Serial0/1
no ip address
shutdown
!
router eigrp 1
redistribute ospf 10 metric 100000 1 255 1 1
network 150.50.24.0 0.0.0.255
no auto-summary
!
router ospf 10
log-adjacency-changes
redistribute connected subnets route-map task10
redistribute static subnets
redistribute rip subnets
passive-interface Serial0/0.24
passive-interface FastEthernet0/1
passive-interface Loopback0
network 150.50.7.0 0.0.0.127 area 1
network 150.50.100.0 0.0.0.31 area 0
default-information originate always
!
router rip
passive-interface Serial0/0.24
passive-interface Serial0/0.256
network 150.50.0.0
no auto-summary
!
ip classless
ip default-network 172.16.0.0
ip route 200.0.0.1 255.255.255.255 150.50.17.1
ip http server
!
!
map-class frame-relay R2_ts
frame-relay adaptive-shaping becn
frame-relay cir 64000
frame-relay bc 8000
frame-relay be 8000
frame-relay mincir 32000
access-list 100 permit icmp host 10.1.1.4 150.50.5.64 0.0.0.31
access-list 101 permit icmp host 150.50.200.1 150.50.5.64 0.0.0.31
route-map task10 permit 10
match interface Loopback0 Loopback1
!
route-map greenandgold permit 10
match ip address 100
set ip next-hop 150.50.100.5
!
route-map greenandgold permit 20
match ip address 101
set ip next-hop 150.50.100.6
!
!
dial-peer cor custom
!
!
!
!
!
line con 0
line aux 0
line vty 0 4
login
!
end
R6#sh running-config
Building configuration...
Current configuration : 1461 bytes
!
version 12.2
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname R6
!
!
ip subnet-zero
!
!
!
!
call rsvp-sync
!
!
!
!
!
!
!
!
interface Loopback0
ip address 200.0.0.6 255.255.255.255
!
interface FastEthernet0/0
description *** LAN CONN TO CAT3550-2-FE0-6 ***
ip address 150.50.7.6 255.255.255.128
ip ospf network point-to-multipoint
delay 100000
duplex auto
speed auto
!
interface Serial0/0
no ip address
ip ospf priority 0
shutdown
!
interface BRI0/0
no ip address
encapsulation hdlc
shutdown
!
interface FastEthernet0/1
no ip address
shutdown
duplex auto
speed auto
!
interface Serial0/1
no ip address
ip ospf priority 0
shutdown
!
interface Serial1/0
bandwidth 1544
ip address 150.50.100.6 255.255.255.224
encapsulation frame-relay
ip ospf network point-to-multipoint
ip ospf priority 0
no fair-queue
no arp frame-relay
frame-relay map ip 150.50.100.2 601 broadcast
frame-relay map ip 150.50.100.5 605 broadcast
frame-relay map ip 150.50.100.6 601
no frame-relay inverse-arp
frame-relay lmi-type cisco
!
interface Serial1/1
no ip address
shutdown
!
interface Serial1/2
no ip address
shutdown
!
interface Serial1/3
no ip address
shutdown
!
router ospf 10
log-adjacency-changes
network 150.50.7.0 0.0.0.127 area 1
network 150.50.100.0 0.0.0.31 area 0
!
ip classless
ip http server
!
!
dial-peer cor custom
!
!
!
!
!
line con 0
line aux 0
line vty 0 4
login
!
end
R6#
Kind Regards,
Manoj Ku
This archive was generated by hypermail 2.1.4 : Fri Jun 03 2005 - 10:11:56 GMT-3