From: Richard Gallagher (rgallagh@cisco.com)
Date: Thu May 05 2005 - 00:55:03 GMT-3
doujie garcia wrote:
> Hi,
>
> I would just like to ask some things about Anycast RP and my questions
> are as follows:
>
> 1. Can Anycast RP be configured without MSDP when you are running it
> inside an IGP domain only?
No, you need MSDP to exchange joins/leaves etc....
>
> 2. Since Anycast RP utilizes same IP Addresses on different routers,
> What is the proper approach to advertise this RP addresses in your
> network? Is it through redistribute coonnected with a different metric
> or just simply through a network command for routing protocols that
> support host Address propagation?
How ever you like really, you can just advertise them into your IGP and
let that take care of it.
>
> 3. Can I also configure it to use MSDP default peer to disable the
> reliance of MSDP to BGP?
If you only have one peer configured then MSDP is intelligent enough to
work this out and will treat is as a default peer.
HTH, Rich
>
>
> Thank you very much and I hope that you can help me on this?
>
> Best,
> Doujie
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Jun 03 2005 - 10:11:56 GMT-3