From: marvin greenlee (marvin@ccbootcamp.com)
Date: Wed May 04 2005 - 16:40:50 GMT-3
GLBP is not a difficult feature to configure if you understand HSRP.
Understand basic configurations, as well as the differences from VRRP/HSRP,
and know where to find examples on the CD.
Marvin Greenlee, CCIE#12237, CCSI# 30483
Network Learning Inc
marvin@ccbootcamp.com
www.ccbootcamp.com (Cisco Training)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of Ed
Lui
Sent: Wednesday, May 04, 2005 12:01 PM
To: ccielab
Subject: GLBP in Lab Exam [bcc][faked-from]
Importance: Low
Hi Group,
I looked under the Part V of the Lab exam blue print for
Routing/Switching track at cisco.com. Found only HSRP is tested.
But under the Lab Equipment and IOS Version
(http://www.cisco.com/en/US/learning/le3/ccie/rs/lab_equipment.html).
It says "IOS version 12.2T , except for IPv6 features, will become
eligible for testing on August 1st, 2004".
According to the documentation from cisco
(http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122newft/12
2t/122t15/ft_glbp.htm)
12.2(14)S This feature was introduced.
12.2(15)T This feature was integrated into Cisco IOS Release 12.2(15)T
My question is, GLBP is being tested in the lab? Or just be familiar
with it and don't spend too much time on it?
Thanks for the input,
Ed Lui
This archive was generated by hypermail 2.1.4 : Fri Jun 03 2005 - 10:11:56 GMT-3