RE: Qos task using rate limit

From: ccie2be (ccie2be@nyc.rr.com)
Date: Sat Apr 30 2005 - 18:09:19 GMT-3


That looks right but the best way to verify this is by setting the clock to
different times and generating www traffic. After doing so, you can check
what happened with show access-list.

You can also use MQC do this as well.

HTH, Tim

-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of san
Sent: Saturday, April 30, 2005 4:02 PM
To: Cisco certification
Subject: Qos task using rate limit

Hi,

Can you verify that whether the below answer meets the questions:

Question:
----------
Vlan 44 are being productive during work hours, your management has
requested all http responses sent out R4 inter e0/1 be limited to
256kbps between the hours of 8am to 5pm M to F.

Answer:
-----------

Inter e0/1
rate-limit access-list 144 256000 32000 0 confirm-action transmit
exceed-action drop

access-list 144 permit tcp any eq www any time-range workinghours

timerange workinghours
periodic weekdays 8:00 to 17:00

Thanks in Advance
SAN



This archive was generated by hypermail 2.1.4 : Tue May 03 2005 - 07:55:11 GMT-3