From: Bob Nelson (nelsnjr@cox.net)
Date: Mon Apr 25 2005 - 20:14:48 GMT-3
Hello:
I am have an issue configuring SVC connections between my routers and the
ATM switch. (IPExpert LAB) I have tried several different versions, with
this one right out of the answer section for this particular lab. I cannot,
with any configuration, get a ping across the link. I do not know if there
is something else needed on the LS1010, as those configurations are not
provided with the setup or solutions for the labs. Can someone please
point me in the right direction?
Have also tried with the arp-server self on one side and the arp-server
command with the nsap pointing to the other. No luck
R6
interface ATM0
ip address 10.0.0.1 255.255.255.0
atm nsap-address 47.00918100000000E01E4A6101.666666666666.00
atm pvc 1 0 5 qsaal
atm pvc 2 0 16 ilmi
no atm ilmi-keepalive
!
svc nsap 47.00918100000000E01E4A6101.666666666666.00
protocol ip 10.0.0.1
!
svc nsap 47.00918100000000E01E4A6101.999999999999.00
protocol ip 10.0.0.2 broadcast
!
end
R9
interface ATM0
ip address 10.0.0.2 255.255.255.0
atm nsap-address 47.00918100000000E01E4A6101.999999999999.00
atm pvc 1 0 5 qsaal
atm pvc 2 0 16 ilmi
no atm ilmi-keepalive
!
svc nsap 47.00918100000000E01E4A6101.999999999999.00
protocol ip 10.0.0.2
!
svc nsap 47.00918100000000E01E4A6101.666666666666.00
protocol ip 10.0.0.1
!
end
Thanks
Bob
This archive was generated by hypermail 2.1.4 : Tue May 03 2005 - 07:55:09 GMT-3