From: Patrick Lynchehaun (plynch@servecentric.com)
Date: Tue Apr 26 2005 - 08:27:43 GMT-3
The following have support for IPV6 on the 4500
c4500-p-mz.122-2.T
c4500-p-mz.122-8.T
Thanks,
Patrick.
-----Original Message-----
From: Ian Stong [mailto:istong@stong.org]
Sent: 26 April 2005 12:21
To: 'k c'; 'Zouta oxpf'
Cc: ccielab@groupstudy.com
Subject: RE: 4500 Router and IPV6.
Not sure if you caught it or not but that link is for the 4500 Catalyst
whereas he was asking about the 4500 Router and IPv6 support.
Ian
http://www.ccie4u.com
Rack Rentals starting at only $12
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of k c
Sent: Tuesday, April 26, 2005 1:55 AM
To: Zouta oxpf; istong@stong.org
Cc: ccielab@groupstudy.com
Subject: Re: 4500 Router and IPV6.
fyi
http://www.cisco.com/en/US/products/hw/switches/ps4324/prod_bulletin0900aecd
800fad55.html
IPv6 Software-Switched
IPv6 is a new Internet protocol that addresses the shortage of IP addresses
worldwide. IPv6 quadruples the number of network address bits from 32 to 128
bits. The use of globally unique IPv6 addresses simplifies the mechanisms
used for reachability and
end-to-end security for network devices. Software-based IPv6, including
basic services and manageability, is provided in Cisco IOS Software Release
12.2(20)EW.
Zouta oxpf <zouta.oxpf@gmail.com> wrote:
Thanks for the info. Ian. It seems there were some IOS that supported
IPv6 on the 4x00 routers at a point. But where are they? Hmmm...
ZO.
On 4/25/05, istong@stong.org wrote:
> Based on a feature search on Cisco feature navigator - there
> is no support for IPv6 on the 4500 or 4700 platforms.
> However other searches on the web suggest 12.2T has support.
> as shown here - http://www.ipv6.garr.it/doc/IOS/ftipv6s.pdf
>
> I was not able to find an image with IPv6 support for the
> 4500 based on features listed on CCO.
>
> Thanks,
>
> Ian
> http://www.ccie4u.com
> Rack Rentals and Lab Scenarios starting at $12
>
> > Hey Guys:
> >
> > Is IPV6 supported on the 4500 router platform? I have a
> > few 4500s, and would really like to run IPv6 on these
> > routers. The 4500s are powerful enterprise class router
> > platforms and I would expect some form ipv6 support for
> > them
> >
> > Does Anyone know what code I need to achieve this, and
> > where I can find it.
> >
> > Always
> > ZO.
> >
> > __________________________________________________________
> > _____________ Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> ______________________________________________
>
> Check Your Email From Any Where in the World!
>
> http://www.myemail.com
>
> Tell Your Friends about MyEmail.com!
> ______________________________________________
This archive was generated by hypermail 2.1.4 : Tue May 03 2005 - 07:55:09 GMT-3