nbma mode in mcast

From: khalid mehmood (kmehmood@shaw.ca)
Date: Mon Apr 25 2005 - 00:11:09 GMT-3

• Next message: Pankaj Madhukar Kulkarni: "MQC based FRTS"
• Previous message: "Hoonpongsimanont: "RE: IOS loading problem"
• Next in thread: Brian McGahan: "RE: nbma mode in mcast"
• Maybe reply: Brian McGahan: "RE: nbma mode in mcast"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi Guys,

I have a doubt regarding the nbma mode command. According to the Cisco Doc, it
can be only used with sparse mode . Does it mean that it cannot be configured
on an interface having sparse-dense mode???

My understanding is that under sparse-dense mode as long as an RP is available
, the interface will behave in sparse mode and so the nbma command will also
be effective.

Can anyone throw more light on this issue....

Thanks

KM

• Next message: Pankaj Madhukar Kulkarni: "MQC based FRTS"
• Previous message: "Hoonpongsimanont: "RE: IOS loading problem"
• Next in thread: Brian McGahan: "RE: nbma mode in mcast"
• Maybe reply: Brian McGahan: "RE: nbma mode in mcast"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Tue May 03 2005 - 07:55:08 GMT-3