From: Scott Morris (swm@emanon.com)
Date: Thu Apr 21 2005 - 20:05:59 GMT-3
What version are you running??? "set" was added long before "drop" and
"police" were.....
Scott
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of John
Matus
Sent: Thursday, April 21, 2005 7:01 PM
To: swm@emanon.com; ccielab@groupstudy.com
Subject: RE: precedence int cbwfq
we'll chalk this up to having a 2500 series router without all of the
commands <no set> thanks scott!!!
r1(config-pmap-c)#?
QoS policy-map class configuration commands:
bandwidth Bandwidth
compression Activate Compression
drop Drop all packets
exit Exit from QoS class action configuration mode
no Negate or set default values of a command
police Police
priority Strict Scheduling Priority for this Class
queue-limit Queue Max Threshold for Tail Drop
random-detect Enable Random Early Detection as drop policy
service-policy Configure QoS Service Policy
shape Traffic Shaping
<cr>
>From: "Scott Morris" <swm@emanon.com>
>Reply-To: <swm@emanon.com>
>To: "'John Matus'" <john_matus@hotmail.com>,<ccielab@groupstudy.com>
>Subject: RE: precedence int cbwfq
>Date: Thu, 21 Apr 2005 18:45:43 -0400
>
>Don't forget that "?" is your friend.
>
>Emanon-R1(config)#policy-map Set-This
>Emanon-R1(config-pmap)#class Who-Knows
>Emanon-R1(config-pmap-c)#?
>QoS policy-map class configuration commands:
> bandwidth Bandwidth
> compression Activate Compression
> drop Drop all packets
> exit Exit from QoS class action configuration mode
> no Negate or set default values of a command
> police Police
> priority Strict Scheduling Priority for this Class
> queue-limit Queue Max Threshold for Tail Drop
> random-detect Enable Random Early Detection as drop policy
> service-policy Configure QoS Service Policy
> set Set QoS values
> shape Traffic Shaping
> <cr>
>
>Emanon-R1(config-pmap-c)#set ?
> atm-clp Set ATM CLP bit to 1
> cos Set IEEE 802.1Q/ISL class of service/user priority
> discard-class Discard behavior identifier
> dscp Set DSCP in IP(v4) and IPv6 packets
> fr-de Set FR DE bit to 1
> ip Set IP specific values
> mpls Set MPLS specific values
> precedence Set precedence in IP(v4) and IPv6 packets
> qos-group Set QoS Group
>
>Emanon-R1(config-pmap-c)#
>-----Total Telnet Time 8.54 seconds-----
>
>Scott
>;)
>
>-----Original Message-----
>From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
>John Matus
>Sent: Thursday, April 21, 2005 6:26 PM
>To: ccielab@groupstudy.com
>Subject: precedence int cbwfq
>
>is there a way to mark precedence in cbwfq?
>
>_________________________________________________________________
>Express yourself instantly with MSN Messenger! Download today - it's FREE!
>http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/
>
>_______________________________________________________________________
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
>
This archive was generated by hypermail 2.1.4 : Tue May 03 2005 - 07:55:06 GMT-3